Volume Boosters

Volume Booster is a high volume amplifier used to increase the operating speed of the actuator, preventing the time lags, in the systems where controller and the control valve are separated by extremely long piping runs.

Add to quote
Categories: ,

Downloads

Specification Document

Design Features

  • Improves the stroking speed of large diaphragm actuated valves.
  • Allows normally slow actuator response to the slow signal changes produced by usual process variations.
  • Soft seat provides tight shut off to prevent unnecessary air consumption.

About Volume Boosters

Volume Booster is a high volume amplifier used to increase the operating speed of the actuator, preventing the time lags, in the systems where controller and the control valve are separated by extremely long piping runs.

Volume Booster receives the low volume signal from the controller and transmits from an auxiliary supply a high volume signal to the control valve actuator.

Volume Booster is specially recommended for the use with large capacity diaphragm actuator.

Product Specifications

Connections1 /4” 1/2" 3/4" NPT (F)
Max. Supply PressureMust be same as final control device. Up to 40 psig normally used with diaphragm actuators. Up to 150 Psig normally used with piston actuators.
Pressure Ratio1:1
Output Capacity13.5 or 115 SCFM
Flow Capacity( Cv ) : 1.02 or 3.0
Reproducibility0.1 %
Temperature-20o to 70o
MOCAluminum LM6 or Stainless steel

Related products