Valve Series

Series 170
Angle & Choke Valves

The Series 170 Control Valve product range emulates the Series 110 design except that the valve body is an angle type constitution instead of a globe style.

This range of control valves can be fitted with the same trim design options as the Series 110 product. It is used where the pipework configuration necessitates an angle pattern design.

The Series 170 can also be adapted to the choke valve application and again fitted with a selection of trim designs to suit each application in conjunction with the angle body configuration.

This range can be fitted with standard and severe service trim designs.

In conjunction with this the trims could be supplied manufactured in hard metal for potentially erosive applications.


Specification

Design Code ASME B16-34
Valve Size 25 to 600 mm (1” to 24”)
Rating ANSI 150 to 2500 or equivalents to DIN, BS10, JIS etc
End Connection Flanged, Hubbed, Butt weld
Body Material Carbon steel, Chrome-moly steel, Stainless steel, Monel, Alloy 20, Hastelloy B/C, Duplex stainless steel, Aluminium bronze
Bonnet Standard up to 400°C Normalising between 250°C to 500°C Extended cold service -20°C to -100°C
Cryogenic -100°C to -250°C Bellowseal
Gland Packing PTFE Chevrons, Graphite, Low emission
Trim Form Top guided contoured, Spline Micro Flow Ported cage (unbalanced / balanced) Low Noise (LR1, LR2, LR3, LR4)
Trim Material Stainless steel, Duplex stainless steel, 13% Chrome steel, Monel Hastelloy B/C, Stellite
Flow Characteristic Equal Percentage, Linear, Quick Opening
Seat Leakage As per ANSI / FCI 70-2-2006 Class III, IV, V and VI
Actuator Form Diaphragm, Piston or Electric
Actuator Type Direct / Reverse Acting
Diaphragm Nitrile / Neoprene (nylon reinforced)
Accessories Valve Positioners - Pneumatic, Electro-Pneumatic, Smart
Instruments - Airset, Solenoid Valve, Volume Booster, Airlock, Limit Switches
Features Top or Side Mounted hand wheel, Limit Stops Removable Blind Head, Steam Jacketing etc.

 


Design Features

  • High flow capacity and rangeability. 
  • Large variety of trim designs. 
  • Top entry for ease of inspection and maintenance. 
  • Designed with clamped seat and trim configuration. 
  • Unbalanced or balanced plug design options to achieve specified leakage requirements
  • Wide selection of actuators to meet most system requirements.

Downloads

Recent Clients

Contact Us

For more information on any of our products and services, please call:

+44 (0) 1274 531992

You can email:
enquiry@valvesolutions.co.uk

or visit:
Valve Solutions Ltd, Unit 10,
Acorn Business Park, Baildon
Shipley BD17 7SW